Speciality Wood Primer

An alkyd based primer for interior/exterior wood work.

Products Applications:
Primers

Purchase:
Prominent Wood Primer is available in the following sizes: 1lt and 5lt

Download Material Safety data sheet

Download Technical Safety data sheet

Categories: ,

COLOURS AVAILABLE

Reddish

PRODUCT DETAIL

Appearance: Low sheen.
Spreading Rate: 8 – 10 m²/litre dependent on surface grain.
Solids: ± 65% by mass and ± 42% by volume.
Density: 1,26 kg/litre.
Recommended Dry Film Thickness: 2 coats at 30 – 40 µm per coat minimum.
Viscosity: 65 Kµ.
Flash Point: 35°C.

Storage:

  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold in a place with adequate ventilation.

Available Sizes: 1Lt, 5Lt
Colours: Reddish
Respecting The Environment:

  • 100% Lead Free.
  • Dispose of excess product and containers in a responsible manner without harming the environment.
  • This product is manufactured under strict SABS ISO 9001 quality standards.

TECHNICAL DATASHEET

Features

  • Good adhesion to timber and hardboard.
  • Easily overcoated with conventional decorative coatings.
  • Provides good protection for wood.
  • 100% lead free.

Intended Usages

  • Primer for timber and hardboard surfaces.

Application Details

  • Mixing: Stir well before use with a flat paddle to an even consistency. Stir occasionally during use.
  • Method: Roller or brush.
  • Thinning: ProGold Mineral Turpentine.
  • Cleaning: Remove as much of the product as possible from the application equipment before cleaning with ProGold Mineral Turpentine.

Conditions:

  • Temperature between 5°C and 40°C.
  • Relative humidity of less than 85 %, preferably between 10: 00 and 16: 00.

Drying time: Surface dry – 4 hours; Hard dry – 16 hours.

Recoating time: 18 hours.

Requirements:
 2 coats for proper penetration.

Surface Preparations
Wood:

  • Sand smooth, remove dust and apply directly.

Hardboard:

  • Sand smooth, remove dust and apply directly.

Recommended only as a primer.

Limitations

  • Only intended as a primer for wood and hardboard.
  • Must be overcoated within 7 days as it is not UV stable.

Safety

  • Keep out of reach of children.
  • Ensure to maintain good ventilation during application and drying process.
  • In case of skin contact, wash with soap and water or a recognised skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice.
  • If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice.
  • Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. MSDS is available on www.prominentpaints.co.za or from Prominent Customer Service Department.
  • To avoid any risk of spillage, always transport in a secure upright position.

PRODUCT SAFETY

  • Keep out of reach of children.
  • Ensure to maintain good ventilation during application and drying process.
  • In case of skin contact, wash with soap and water or a recognised skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice.
  • If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice.
  • Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. MSDS is available on www.prominentpaints.co.za or from Prominent Customer Service Department.
  • To avoid any risk of spillage, always transport in a secure upright position.