HIGH COVER

MAIN ATTRIBUTES

• Economical to use.
• Good coverage.
• Good over coating properties.
• Low odour.
• 100% lead-free.
• Suitable for use on interior walls and ceilings (not kitchen or bathroom ceilings).

GENERAL DATA

• Touch Dry: 30 Minutes – 1 Hour, @ 23°C
• Recoating Time: 4 Hours @ 23°C
• Spreading Rate: 7- 8m²/litre, depending on porosity of surface

SURFACE PREPARATION

New Surfaces

Newly Plastered Surfaces:
The surface should be in good condition before the paint is applied, powdery surfaces might lead to paint failure. If the surface is powdery, sand down and remove dust before applying Top Paints’ Bonding Liquid and leave to dry for 24 hours. Apply 2 coats of TREND HIGH COVER.

Previously Painted Surfaces

Old paint in sound condition:
Clean and apply TREND HIGH COVER if surface was previously painted with an emulsion paint. If surface was previously painted with solvent based / enamel paint, sand down and remove dust. Apply Top Paints’ Universal Undercoat and allow to dry before applying 2 coats of TREND HIGH COVER. A surface previously painted with a gloss paint can also be sanded, all dust removed and then coated with 2 coats TREND HIGH COVER.

Old paint in poor condition:
Completely strip surface and treat as new work.

Packaging
5L and 20L (only white)

Storage
Keep away from direct sunlight, heat and severe cold Keep container sealed and avoid contact with moisture

DATASHEETS

• For full Technical and Material Safety Data Sheets, please contact paintwise or send an enquiry to paintwise@vodamail.co.za