VELVET SHEEN

Newly Plastered Surfaces:
The surface should be in good condition before the paint is applied, powdery surfaces might lead to paint failure. If the surface is powdery sand down and remove dust. Apply Top Paints’ Bonding Liquid and leave to dry for 24 hours. Apply Top Paints’ Fillercoat and allow to dry for at least 4 hours. Alternatively apply Top Paints’ Plaster Primer to powdery surface and allow to dry. If the surface is in a good condition prime with either Top Paints’ Plaster Primer or Top Paints’ Fillercoat. Apply 2 coats VELVET SHEEN.

Previously Painted Surfaces

Old paint in sound condition:
Clean and apply VELVET SHEEN if surface was previously painted with an emulsion paint. If surface was previously painted with solvent based / enamel paint, apply Top Paints’ Universal Undercoat and allow to dry before applying 2 coats of VELVET SHEEN. A surface previously painted with a gloss paint can also be sanded, all dust removed and then coated with 2 coats VELVET SHEEN.

Old paint in poor condition:
Completely strip surface and treat as new work.

Packaging
1, 5 and 20 litres.
Storage
Store away from direct sunlight, heat and severe cold. Keep container sealed and avoid moisture contact.
Caution
During Winter months painting should be restricted to between 09H00 and 15H00, in Summer painting can be done between 08H00 and 16H00. Exterior surfaces – Do not paint if rain is imminent.