Acrylic Sealer

A high quality acrylic emulsion.

Products Applications:
Other (Interior), Other (Exterior), Other (Interior & Exterior), Interior, Exterior and Interior & Exterior

Purchase:
Prominent Acrylic Sealer is available in the following sizes: 1lt , 5lt and 20lt

Download Material Safety data sheet

Download Technical Safety data sheet

Categories: ,

COLOURS AVAILABLE

Clear

PRODUCT DETAIL

Appearance: Clear film.
Spreading Rate: Not applicable.
Solids: 25% by mass.
Density: 1,02 Kg/litre.
Recommended Dry Film Thickness: Not applicable.
Recommended Wet Film Thickness: Not applicable.
Viscosity: ± 60 Kµ.
Flash Point: Non-flammable.

Storage:

  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold in a place with adequate ventilation.

Available Sizes: 1Lt, 5Lt, 20Lt
Colours: Clear
Respecting The Environment:

  • 100% Lead Free.
  • Dispose of excess product and containers in a responsible manner without harming the environment.
  • This product is manufactured under strict SABS ISO 9001 quality standards.

TECHNICAL DATASHEET

Features

  • Waterproofs cement plasters.
  • Increases impact resistance of cement plasters as well as new plaster to existing plaster.
  • Waterbased: Easy application and clean up.
  • 100% lead free.
  • Improves adhesion of cement plasters.

Intended Usages

  • As a sealer coat key to improve adhesion of unabsorbent surfaces, e.g. previously painted surfaces.
  • As an additive to improve water resistance, adhesion and impact resistance.

Application Details

  • Mixing: Stir before use with a flat paddle to an even consistency. Stir occasionally during use.
  • Method: Roller, brush when used as plaster key.
  • Thinning: Water.
  • Cleaning: Remove as much of the product as possible from the application equipment before cleaning with water.
  • Conditions: Temperature between 5°C and 40°C. Relative humidity of less than 85%, preferably between 10: 00 and 16: 00.

Limitations

  • May not be used as a varnish or topcoat.
  • Not for areas prone to traffic e.g. floors.

Safety

  • Keep out of reach of children.
  • Ensure to maintain good ventilation during application and drying process.
  • In case of skin contact, wash with soap and water or a recognised skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice.
  • If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice.
  • Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. MSDS is available on www.prominentpaints.co.za or from Prominent Customer Service Department.
  • To avoid any risk of spillage, always transport in a secure upright position.

PRODUCT SAFETY

  • Keep out of reach of children.
  • Ensure to maintain good ventilation during application and drying process.
  • In case of skin contact, wash with soap and water or a recognised skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice.
  • If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice.
  • Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. MSDS is available on www.prominentpaints.co.za or from Prominent Customer Service Department.
  • To avoid any risk of spillage, always transport in a secure upright position.